Brushing
WSP heavy brushing machine, supported by bearings on two sides

Abrasive brushing machines are a key tool for the final surface appearance of your product.

 

Vibration Strength of the Construction

Even minor vibrations can be recognized on fast moving strip. Therefore, WSP machines are
  • optimized by FEM Analysis,
  • their housings are filled with a damping compound (trademarked by WSP patent),
  • Since the deflection of the brush shaft increases with the cube of the bearings distance, a low bearing distance is essential. The shafts of our brushing machines are as short as possible. For this reason, the bearings of our heavy machines are installed in the machine housing. 

 WSP heavy duty brushing machines

 

Positioning

The WSP Finish Brushes are positioned by servo drives. The positioning accuracy is in the range of a few hundredths of a millimeter. The brushes are retracted by servo drives for strip stitch passage. This is advantageous, because the tolerances are added with so-called "combined solutions" (e.g. hydraulical retraction and positioning by servo drive).

 

Control

Generally, the WSP machines can be operated in two modes:
  • Position control
  • Current control

 

Maintainability

  • The interior of all WSP machines is illuminated and has large glass doors. Thus, it is always possible to inspect the process. In case of strip standstill, the condition of the brushes can be checked within secondes - by opening the door -
  • All brushes can be exchanged quickly (max. 10 minutes per brush)

 

WSP Bürstmaschinen - Prüfstandergebnisse

WSP Brush Test Facility

Our laboratory is equipped with a brush test facility. This test stand has a decoiler and a coiler so that we are able to simulate the actual conditions in a strip line. Of course, the test stand can also be operated "in wet".
















WSP Engineering

... since 1989

WSP GmbH was founded in 1989 by Prof. Dr.-Ing. Carl Kramer. At first, as an engineering office, later our spectrum has been enlarged  ...Read more...

Laboratory Heat Treatment Plant at ITP

Institut für Termorpozesstechnik - ITP - Labor Wärmebehandlungsanlage

... for your material development

 ITP - Institut für Thermopozesstechnik has developed and built a heat treatment plant to anneal samples with the real temperature and speed of an annealing line. This may accelerate your material development ... Read more...

WSP - German Quality

WSP - Made in Germany

Contact - WSP

Our address:
An der Glashütte 10
52074 Aachen, Germany
phone +49 241-879703-0
This email address is being protected from spambots. You need JavaScript enabled to view it.
Office hours:
Monday-Friday 08:00 a.m. - 05:00 p.m.



Our Customers

About this website

This website uses Google Analytics, a web analytics service provided by Google Inc. („Google“). Google Analytics uses so-called „Cookies“, text files that are stored on your computer, helping to analyze, how users use the website. You may refuse the use of cookies by selecting the appropriate settings in your brwoser software; however, we point out that in this case it maybe will not be possible to use all functions of this website fullly. Furthermore, you can prevent the collection and circulation of data generated by the cookie as well as data concerning your use of the website (including your IP address) by loading and installing the following plug-in: Google Browser Plugin .

Language