Strip Plants
Bandlinie DAP-Linie

Whether discontinuous or continuous, WSP delivers your plant from a single source. Made in Germany, installation worldwide!

General

We cover the complete range of strip plants. Mainly, strip annealing lines, degreasing lines, pickling lines, coating lines or tinning lines. Engineering and manufacturing are completely excecuted in Aachen, Germany. We gained worldwide experience in installation and commissioning of turnkey systems.

Typical parameters of our plants:

  • Strip material:                   Copper, brass, bronze, aluminum
  • Strip width:                       300 - 1,200 mm
  • Strip thicknesses:               0.05 - 5.0 mm (up to 6.0 mm for aluminum)
  • Strip speed:                      40 - 100 m/min (up to 200 m/min for thin strip-plants)
  • Type of operation:              discontinuous (batch operation) and continuous
  • Building:                           on one level up to three levels - anything is possible
  • Strip connection:                mechanical punch with lacing bond or welding connection

If you like to optimize or exchange parts of an existing line or even if you require a completely new line - contact the WSP Team for expert advise!

 

For Example: WSP Torque Dancers

WSP Torquedancer - Dancer for thin stripsThis video will show you the advantages ouf our Torque Dancer:
  • no stick-slip-effects (compared to pneumatic dancers)
  • no damping which is always the case for pneumatic dancers (air must be discharged)
  • because the dancer arm is coupled directly to the torque motor, there are no friction losses as it would be the case with an extra gear.
  • the common error of a swing dancer (feeding angle/exit angle are changing) is compensated (in real time) by our WSP Control System.

The WSP Torque Dancer is suitable for areas where tension accuracy is of particular importance. Integration into an existing system is possible.

WSP Engineering

... since 1989

WSP GmbH was founded in 1989 by Prof. Dr.-Ing. Carl Kramer. At first, as an engineering office, later our spectrum has been enlarged  ...Read more...

Laboratory Heat Treatment Plant at ITP

Institut für Termorpozesstechnik - ITP - Labor Wärmebehandlungsanlage

... for your material development

 ITP - Institut für Thermopozesstechnik has developed and built a heat treatment plant to anneal samples with the real temperature and speed of an annealing line. This may accelerate your material development ... Read more...

WSP - German Quality

WSP - Made in Germany

Contact - WSP

Our address:
An der Glashütte 10
52074 Aachen, Germany
phone +49 241-879703-0
This email address is being protected from spambots. You need JavaScript enabled to view it.
Office hours:
Monday-Friday 08:00 a.m. - 05:00 p.m.



Our Customers

About this website

This website uses Google Analytics, a web analytics service provided by Google Inc. („Google“). Google Analytics uses so-called „Cookies“, text files that are stored on your computer, helping to analyze, how users use the website. You may refuse the use of cookies by selecting the appropriate settings in your brwoser software; however, we point out that in this case it maybe will not be possible to use all functions of this website fullly. Furthermore, you can prevent the collection and circulation of data generated by the cookie as well as data concerning your use of the website (including your IP address) by loading and installing the following plug-in: Google Browser Plugin .

Language